Protective Coatings Plus

From: Mazda Motor OEM

Dear Sir:

Please note for your reference as of this coming September, 1991 Fire Glaze Paint Sealant as well as R.A.L.G. brand polishes manufactured by American Chemical Mfg. Co. Inc. will be listed in our parts book and will carry the official O.E.M. number "K 801W0770". This is Mazda's original equipment manufacture's number.

We are very pleased with the super results of your polishes and product's quality unsurpassed by all leading American Chemical manufactures in the United States. Thank you for your support.

Best Regards,

Yushin-onward
Shigeru Hirano
Mazda Motor Corporation

From: Ramtech Laboratories, Inc.

To: Mr. Elliott Segal, Guthy-Renker Corp.

Dear Mr. Segal:

Based on the tests conducted on the six automotive surface enhancement polishes, the summary statements are as follows.

• Fire Glaze had the highest initial gloss of all the six polishes tested.
• Fire Glaze overall had the higher level of protection than other polishes, waxes and resins based on performance tests conducted on six products.
• Fire Glaze offers UV protection not found in the other waxes/resins tested.
• Fire Glaze is easier to apply than the other waxes/resins tested.
• Fire Glaze is overall the superior polish to the extent of the tests that have been performed.

The above statements are also based on the testing and results described in Preliminary Test Report No. 10102-94.

Final Report Prepared By:
Robert Dunaetz
Chief Chemist
Ramtech Laboratories, Inc.

Final Report Approved By:
Ronald Macey, P. E.
Laboratory Director
Ramtech Laboratories, Inc.

From: Coca-Cola

To: FireGlaze

In June of 1986 I was contacted by an independent sales representative, A Mike Vizena dba EASY CARE. Mike demonstrated your product, FIREGLAZE, to me and explained the positive features.

I am very skeptical of the new products that claims that some make. FIREGLAZE impressed me enough that I purchased one bottle to try on a couple of our over-the-road transport tractors. The drivers who used your product FIREGLAZE were so impressed with the results that they asked met o purchase more so that they could finish the job on their tractors, also many of the other drivers asked if they could polish tractors as well.

I must admit that the tractors which FIREGLAZE was used on, one new and one old tractor which was in need of a paint job erased any disbelief I may have had about the product. TO quote the driver of the tractor needing a paint job “It won’t needs another paint job for another year when I get through.” We found that it worked on all types of surfaces: chrome, polished aluminum, paint on metal and paint on fiberglass.

I took some from the bottle home and tried it on my sailboat which was very oxidized, I must tell you that I was very very happy with the results.

I am now sold on FIREGLAZE and am ordering 24 more bottles which I am sure will be used. You see the fleet that I work with is very large.

Thank you very much

Robert Omoth

Fleet Clerk

From: Naval Facility Centerville Beach, Transport DIV.

Ferndale, CA 95536

To: ACM Mfg. International Co., INC.

Dear Mr. Stevens;

I would like to express my gratitude in writing, for an outstanding product you have marketed called “FIREGLAZE SEALANT”. Our fleet of vehicles here at Centerville Beach Naval Facility are constantly subjected to salt air mist. In the last year I have noticed a difference in the appearance of vehicles sealed with FIREGLAZE vs. those that were sealed with another product.

The FireGlaze vehicles seem to stay shinier and easier to wash with outstanding long term water repelling characteristics

Your product has already saved this facility a great deal of money, as it is part of the overall Corrosion Control Program.

Again I say, THANK YOU.

LARRY D. BARNETT, Transportation Director

NAFAC Centerville Beach

From: US Air Force Reserve

Mr. Perry Stevens

I have been using Fire Glaze polish for 7 or 8 years and have had incredible results.

I use Fire Glaze on all my cars, ,y boat all of the faucets in my home, the kitchen stove and refrigerator. Anything that needs protecting.

I have also used Fire Glaze on the job. I am a crew chief on F-16 fighter aircraft. I use Fire Glaze on the leading edges of the wings and on the randome (nose) to protect the paint from bug splatter, etc. The results continue to me amazing. After flying for 3 hours at speeds up to 1200 MPH and running in to a million bugs, a simple wipe down removes the residue with ease.

I highly recommend Fire Glaze to anyone who wants the “best of the best.”

L.D Duncan, Msgt

U.S. Air Force Reserve

From: Phillips Mazda

Norco, CA 91760

To whom it may concern,

I am writing this letter to let you know about a fantastic vehicle polish called Fire Glaze professional polish that we are using in out detail area and for over the counter sales. On April 17, 1997, Alan Spann visited our dealership for normal maintenance on his vehicle.

Alan notched a heavily oxidized and faded blue 1984 626 sedan in which we had completed repairs. Alan mentioned to the Service Adviser that his Fire Glaze polish would easily remove all oxidation and restore a glass like shine and smooth feel to this car. Everyone was quite skeptical, due to the fact that this car looked as if it had not been waxed in over five years, and we were convinced that a new paint job was needed.

Alan convinced me to give him permission to use the product on the car. To everyone’s amazement including the mechanics who has worked on the vehicle, the Fire Glaze polish easily removed the heavy layers of oxidation, fading, and produced a glass like shine with a smooth feel on this thirteen (13) year old vehicle. As a matter of fact the vehicle looked like new. We applied and removed the Fire Glaze polish by hand and with not much effort as the product goes on and is removed easily.

The Fire Glaze polish is the best polish I have ever used and I highly recommend it because it produces outstanding result;, and its economical. Because of its one step application, rubbing compounds, and cutters are not necessary even for heavily oxidized vehicles. This allows me to reduce material costs and labor time. Our customers are greatly pleased as well.

Sincerely,

Bill McLain

Service Director

From: Mazda Motor OEM

Dear Sir:

Please note for your reference as of this coming September, 1991 Fire Glaze Paint Sealant as well as R.A.L.G. brand polishes manufactured by American Chemical Mfg. Co. Inc. will be listed in our parts book and will carry the official O.E.M. number "K 801W0770". This is Mazda's original equipment manufacture's number.

We are very pleased with the super results of your polishes and product's quality unsurpassed by all leading American Chemical manufactures in the United States. Thank you for your support.

Best Regards,

Yushin-onward
Shigeru Hirano
Mazda Motor Corporation

From: Ramtech Laboratories, Inc.

To: Mr. Elliott Segal, Guthy-Renker Corp.

Dear Mr. Segal:

Based on the tests conducted on the six automotive surface enhancement polishes, the summary statements are as follows.

• Fire Glaze had the highest initial gloss of all the six polishes tested.
• Fire Glaze overall had the higher level of protection than other polishes, waxes and resins based on performance tests conducted on six products.
• Fire Glaze offers UV protection not found in the other waxes/resins tested.
• Fire Glaze is easier to apply than the other waxes/resins tested.
• Fire Glaze is overall the superior polish to the extent of the tests that have been performed.

The above statements are also based on the testing and results described in Preliminary Test Report No. 10102-94.

Final Report Prepared By:
Robert Dunaetz
Chief Chemist
Ramtech Laboratories, Inc.

Final Report Approved By:
Ronald Macey, P. E.
Laboratory Director
Ramtech Laboratories, Inc.

From: Coca-Cola

To: FireGlaze

In June of 1986 I was contacted by an independent sales representative, A Mike Vizena dba EASY CARE. Mike demonstrated your product, FIREGLAZE, to me and explained the positive features.

I am very skeptical of the new products that claims that some make. FIREGLAZE impressed me enough that I purchased one bottle to try on a couple of our over-the-road transport tractors. The drivers who used your product FIREGLAZE were so impressed with the results that they asked met o purchase more so that they could finish the job on their tractors, also many of the other drivers asked if they could polish tractors as well.

I must admit that the tractors which FIREGLAZE was used on, one new and one old tractor which was in need of a paint job erased any disbelief I may have had about the product. TO quote the driver of the tractor needing a paint job “It won’t needs another paint job for another year when I get through.” We found that it worked on all types of surfaces: chrome, polished aluminum, paint on metal and paint on fiberglass.

I took some from the bottle home and tried it on my sailboat which was very oxidized, I must tell you that I was very very happy with the results.

I am now sold on FIREGLAZE and am ordering 24 more bottles which I am sure will be used. You see the fleet that I work with is very large.

Thank you very much

Robert Omoth

Fleet Clerk

From: Naval Facility Centerville Beach, Transport DIV.

Ferndale, CA 95536

To: ACM Mfg. International Co., INC.

Dear Mr. Stevens;

I would like to express my gratitude in writing, for an outstanding product you have marketed called “FIREGLAZE SEALANT”. Our fleet of vehicles here at Centerville Beach Naval Facility are constantly subjected to salt air mist. In the last year I have noticed a difference in the appearance of vehicles sealed with FIREGLAZE vs. those that were sealed with another product.

The FireGlaze vehicles seem to stay shinier and easier to wash with outstanding long term water repelling characteristics

Your product has already saved this facility a great deal of money, as it is part of the overall Corrosion Control Program.

Again I say, THANK YOU.

LARRY D. BARNETT, Transportation Director

NAFAC Centerville Beach

From: US Air Force Reserve

Mr. Perry Stevens

I have been using Fire Glaze polish for 7 or 8 years and have had incredible results.

I use Fire Glaze on all my cars, ,y boat all of the faucets in my home, the kitchen stove and refrigerator. Anything that needs protecting.

I have also used Fire Glaze on the job. I am a crew chief on F-16 fighter aircraft. I use Fire Glaze on the leading edges of the wings and on the randome (nose) to protect the paint from bug splatter, etc. The results continue to me amazing. After flying for 3 hours at speeds up to 1200 MPH and running in to a million bugs, a simple wipe down removes the residue with ease.

I highly recommend Fire Glaze to anyone who wants the “best of the best.”

L.D Duncan, Msgt

U.S. Air Force Reserve

From: Phillips Mazda

Norco, CA 91760

To whom it may concern,

I am writing this letter to let you know about a fantastic vehicle polish called Fire Glaze professional polish that we are using in out detail area and for over the counter sales. On April 17, 1997, Alan Spann visited our dealership for normal maintenance on his vehicle.

Alan notched a heavily oxidized and faded blue 1984 626 sedan in which we had completed repairs. Alan mentioned to the Service Adviser that his Fire Glaze polish would easily remove all oxidation and restore a glass like shine and smooth feel to this car. Everyone was quite skeptical, due to the fact that this car looked as if it had not been waxed in over five years, and we were convinced that a new paint job was needed.

Alan convinced me to give him permission to use the product on the car. To everyone’s amazement including the mechanics who has worked on the vehicle, the Fire Glaze polish easily removed the heavy layers of oxidation, fading, and produced a glass like shine with a smooth feel on this thirteen (13) year old vehicle. As a matter of fact the vehicle looked like new. We applied and removed the Fire Glaze polish by hand and with not much effort as the product goes on and is removed easily.

The Fire Glaze polish is the best polish I have ever used and I highly recommend it because it produces outstanding result;, and its economical. Because of its one step application, rubbing compounds, and cutters are not necessary even for heavily oxidized vehicles. This allows me to reduce material costs and labor time. Our customers are greatly pleased as well.

Sincerely,

Bill McLain

Service Director